101 GB/T 2861.12-1990 冲模导向装置 A型可卸导柱 Guide unit for press tools—Guide pillar with taper lead, type A
102 GB/T 2861.13-1990 冲模导向装置 B型可卸导柱 Guide unit fir press tools—Guide pillar with taper lead, type B
103 GB/T 2861.14-1990 冲模导向装置 衬套 Guide unit for press tools—Bushing
104 GB/T 2861.15-1990 冲模导向装置 垫圈 Guide unit for press tools—Washer
105 GB/T 2861.16-1990 冲模导向装置 压板 Guide unit for press tools—Clampr
106 GB/T 2861.17-1981 冷冲模导向装置 可卸导柱模座安装尺寸 Guide unit of cold press dies--Mounting dimension of die holder for removable guide pillars
107 GB/T 2861.18-1981 冷冲模导向装置 压圈固定导柱 Guide unit of cold press dies--Guide pillars with ring fixed
108 GB/T 2861.19-1981 冷冲模导向装置 压圈固定导套 Guide unit of cold press dies--Guide bushing with ring fixed
109 GB/T 2861.20-1981 冷冲模导向装置 压圈 Guide unit of cold press dies--Clamping ring
110 GB/T 3043-1989 棕刚玉 化学分析方法 Chemical analysis methods for brown fused alumina
111 GB/T 3044-1989 白刚玉、铬刚玉 化学分析方法 Chemical analysis methods for white fused alumina and pink fused alumina
112 GB/T 3045-1989 碳化硅 化学分析方法 Chemical analysis methods for silicon carbide
113 GB/T 3227-1988 机动套筒扳手的传动四方 Driving squares for power socket wrenches
114 GB/T 3228-1988 机动套筒扳手的四方传动套筒 Square drive sockets for power socket wrenches
115 GB/T 3229-1988 机动工具的六角传动端 Hexagon drive ends for power tools
116 GB/T 3390.1-1989 手动套筒扳手套筒 Hand operated square drive socket
117 GB/T 3390.2-1989 手动套筒扳手传动方榫和方孔 Driving square for hand operated socket wrenches
118 GB/T 3390.3-1989 手动套筒扳手传动附件 Drivings parts for hand operated square drive socket wrenches
119 GB/T 3390.4-1989 手动套筒扳手连接附件 Conjoining parts for hand operated square drive socket wrenches
120 GB/T 3390.5-1989 手动套筒扳手检验规则、包装与标志 Inspection, packaging and marking for hand operated socket wrenches
121 GB/T 3464.1-1994 机用和手用丝锥 Machine and hand taps
122 GB/T 3464.2-1994 长柄机用丝锥 Long shank machine taps
123 GB/T 3464.3-1994 短柄机用和手用丝锥 Short shank machine and hand taps
124 GB/T 3466-1983 长柄螺母丝锥 Long shank nut taps
125 GB/T 3506-1993 螺旋槽丝锥 Machine taps with helical flutes
126 GB/T 4169.1-1984 塑料注射模具零件 推杆 Components of injection mould for plastics--Ejector pins
127 GB/T 4169.2-1984 塑料注射模具零件 直导套 Components of injection mould for plastics--Straight guide bushes
128 GB/T 4169.3-1984 塑料注射模具零件 带头导套 Components of injection mould for plastics--Guide bushes with head
129 GB/T 4169.4-1984 塑料注射模具零件 带头导柱 Components of injection mould for plastics--Guide pillars with head
130 GB/T 4169.5-1984 塑料注射模具零件 有肩导柱 Components of injection mould for plastics -- Guide pillars with shoulder
131 GB/T 4169.6-1984 塑料注射模具零件 垫块 Components of injection mould for plastics -- Spacer blocks
132 GB/T 4169.7-1984 塑料注射模具零件 推板 Components of injection mould for plastics--Ejector plates
133 GB/T 4169.8-1984 塑料注射模具零件 模板 Components of injection mould for plastics--Mould plates
134 GB/T 4169.9-1984 塑料注射模具零件 限位钉 Components of injection mould for plastics--Stop pins
135 GB/T 4169.10-1984 塑料注射模具零件 支承柱 Components of injection mould for plastics--Support pillars
136 GB/T 4169.11-1984 塑料注射模具零件 圆锥定位件 Components of injection mould for plastics--Locating elements
137 GB/T 4170-1984 塑料注射模具零件技术条件 Components of injection mould for plastics--Specifica-tion
138 GB/T 4211-1984 高速钢车刀条 High speed steel tool bits
139 GB/T 4243-1984 锥柄长刃机用铰刀 Long fluted machine reamers with Morse taper shanks
140 GB/T 4244-1984 带刃倾角直柄机用铰刀 Machine reamers with edge inclination with parallel shanks

141 GB/T 4245-1984 机用铰刀技术条件 Machine reamers--Technical requirements
142 GB/T 4246-1984 铰刀专用公差 Special tolerance for reamers
143 GB/T 4247-1984 锥柄机用桥梁铰刀 Machine bridge reamers with Morse taper shanks
144 GB/T 4248-1984 手用1:50锥度销子铰刀技术条件 Hand taper 1:50 reamers--Technical requirements
145 GB/T 4250-1984 圆锥铰刀技术条件 Taper reamers--Technical requirements
146 GB/T 4251-1984 硬质合金直柄机用铰刀 Machine reamers with parallel shanks with carbide tips
147 GB/T 4252-1984 硬质合金锥柄机用铰刀 Machine reamers with Morse taper shanks with carbide tips
148 GB/T 4253-1984 硬质合金铰刀技术条件 Reamers with carbide tips--Technical requirements
149 GB/T 4255-1984 套式铰刀和套式扩孔钻用心轴 Arbors for shell reamers and shell core drills
150 GB/T 4256-1984 直柄扩孔钻 Core drills with parallel shanks
151 GB/T 4257-1984 扩孔钻技术条件 Core drills--Technical requirements
152 GB/T 4258-1984 60°、90°、120°直柄锥面锪钻 Countersinks with parallel shanks for angles 60°90°and 120°inclusive
153 GB/T 4259-1984 锥面锪钻技术条件 Countersinks--technical requirements
154 GB/T 4260-1984 带导柱直柄平底锪钻 Counterbores with parallel shanks and solid pilots
155 GB/T 4261-1984 带可换导柱锥柄平底锪钻 Counterbores with morse taper shanks and detachable pilots
156 GB/T 4262-1984 平底锪钻技术条件 Counterbores--technical requirements
157 GB/T 4263-1984 带导柱直柄90°锥面锪钻 90°Countersinks with parallel shanks and solid pilots
158 GB/T 4264-1984 带可换导柱锥柄90°锥面锪钻 90°Countersinks with morse taper shanks and detachable pilots
159 GB/T 4265-1984 90°锥面锪钻技术条件 90°Countersinks--technical requirements
160 GB/T 4266-1984 锪钻用可换导柱 Detachable pilots for use with counterbores and countersinks
161 GB/T 4267-1984 直柄回转工具用柄部直径和传动方头尺寸 Rotating tools with parallel shanks--Diameters of shanks and sizes of driving squares
162 GB/T 4388-1995 呆扳手、梅花扳手、两用扳手的型式 Types of open-end wrenches, box wrenches and combination wrenches
163 GB/T 4389-1995 螺钉与螺母的装配工具 双头呆扳手、双头梅花扳手、两用扳手头部外形的最大尺寸 Assembly tool for screws and nuts-Openend double-head engineers wrenches, doublehead box wrenches and combination wrenches-Maximum outside dimensions of heads
164 GB/T 4390-1995 公制扳手开口和扳手孔的常用公差 Spanner gaps and sockets-Metric series-tolerances for general use
165 GB/T 4391-1995 双头扳手的对边尺寸组配 Combinations of double-end wrenche gaps
166 GB/T 4392-1995 敲击呆扳手和敲击梅花扳手 Slugging open-end wrenches and slugging box wrenches
167 GB/T 4393-1995 呆扳手?梅花扳手、两用扳手 技术规范 Open-end wrenches, box wrenches and combination wrenches-Technical specifications
168 GB/T 4676-1984 普通磨料取样方法 Method for sampling of conventional abrasive grains
169 GB/T 4678.1-1984 压铸模零件 模块 Die-cast die components--Mold plates
170 GB/T 4678.2-1984 压铸模零件 圆形镶块 Die-cast die components--Round insert blocks
171 GB/T 4678.3-1984 压铸模零件 矩形镶块 Die-cast die components--Rectangular insert blocks
172 GB/T 4678.4-1984 压铸模零件 A型导柱 Die-cast die components--Guide pins type A
173 GB/T 4678.5-1984 压铸模零件 B型导柱 Die-cast die components--Guide pins type B
174 GB/T 4678.6-1984 压铸模零件 A型导套 Die-cast die components--Guide bushings type A
175 GB/T 4678.7-1984 压铸模零件 B型导套 Die-cast die components--Guide bushings type B
176 GB/T 4678.8-1984 压铸模零件 推板 Die-cast die components--Ejector plates
177 GB/T 4678.9-1984 压铸模零件 推板导柱 Die-cast die components--Guide pins for ejector plate
178 GB/T 4678.10-1984 压铸模零件 推板导套 Die-cast die components--Guide bushings for ejector plate
179 GB/T 4678.11-1984 压铸模零件 推杆 Die-cast die components--Ejector pins
180 GB/T 4678.12-1984 压铸模零件 复位杆 Die-cast die components--Return pins
181 GB/T 4678.13-1984 压铸模零件 推板垫圈 Die-cast die components--Ejector plate washers
182 GB/T 4678.14-1984 压铸模零件 限位钉 Die-cast die components--Stop pins
183 GB/T 4678.15-1984 压铸模零件 垫块 Die-cast die components--Spacer blocks
184 GB/T 4679-1984 压铸模零件技术条件 Specification of the die-cast die components
185 GB/T 4755-1984 扭簧比较仪 Microkator
186 GB/T 5102-1985 渐开线花键拉刀技术条件 Broaches for involute spline technical specifications
187 GB/T 5103-1985 渐开线花键滚刀通用技术条件 The general technical specifications for involute splines hobs
188 GB/T 5104-1985 30°压力角渐开线花键滚刀基本型式和尺寸 The basic types and dimensions of hobs for 30°pressure angle involute splines
189 GB/T 5105-1985 45°压力角渐开线花键滚刀基本型式和尺寸 The basic types and dimensions of hobs for 45°pressure angle involute splines
190 GB/T 5106-1985 圆柱直齿渐开线花键量规 Gauges for straight cylindrical involute splines
191 GB/T 5305-1985 手工具包装、标志、运输与贮存 Packaging,marking,transportation and storage of hand tools
192 GB/T 5340-1985 可转位立铣刀 Endmilling cutters with indexable inserts
193 GB/T 5341-1985 可转位三面刃铣刀 Side and facemilling cutters with indexable inserts
194 GB/T 5342-1985 可转位面铣刀 Facemilling cutters with indexable inserts
195 GB/T 5343.1-1993 可转位车刀及刀夹型号表示规则 Turning toolholders and cartridges for indexable inserts--Designation
196 GB/T 5343.2-1993 可转位车刀型式尺寸和技术条件 Turning tools with indexable inserts--Types,dimensions and technical specifications
197 GB/T 5344-1985 普通磨料微粉粒度沉降管测定方法 Sedimentation tube testing method of conventional abrasive microgrits
198 GB/T 5388-1985 链锯 导板 Chain saw--Guide bar
199 GB/T 5389-1985 链锯 锯链 Chain saws--Saw chain
200 GB/T 5391-1985 油锯 台架试验方法 Gasoline powered chain saws--Bench test methods